27MayPressure measurement process of stainless steel hydrogenation reactor1. Use a conduit to connect the nitrogen bottle and the air inlet of the reactor, and tighten the relevant screws. 2. Open the main valve and partial
view more
24MayThe process of producing sorbitol using stainless steel hydrogenation reactorThe reaction medium in the stainless steel hydrogenation reactor is hydrogen, glucose solution, and nickel-magnesium-aluminum alloy (the nickel-magnes
view more
21MayWhat devices does the hydrometallurgical reactor control system consist of?Hydrometallurgy is a process in which metal mineral raw materials are chemically treated or extracted with organic solvents in aqueous solutions in ac
view more
29MarPrecautions when using polytetrafluoroethylene lined reactor1. The temperature of the external heating furnace must not exceed 200°C during operation. If the temperature of the heating furnace is too high,
view more
26MarOperation process of polytetrafluoroethylene lined reactorPour the reactants into the PTFE bushing or PPL bushing, and ensure that the feeding coefficient is less than 0.8. Make sure the gasket under the kett
view more
23MarHow to measure the pressure of an autoclave?1. Connect the nitrogen cylinder to the air inlet of the reactor through the conduit and tighten the relevant screws. 2. Open the main valve and parti
view more
20MarHow to measure the pressure of an autoclave?The core part of the autoclave is a (ring-shaped) strong magnetic coupling, sealing, and stirring device. Multiple magnetic steel rings make two power
view more
17MarKey points for operating laboratory magnetic reactors1. The reactor should be placed indoors. When multiple reactors are equipped, they should be placed separately. Each operating room should have an out
view more
14MarPrecautions during transportation of magnetic reactor1. The reactor should be stored indoors under certain conditions. 2. When the equipment is stored outdoors, care should be taken to cover the reactor
view more
11MarStructural knowledge points of magnetic reactorThe magnetic reaction kettle adopts a static sealing structure, and a magnetic coupling is used to connect the stirrer and the motor drive. Due to its
view more
08MarHow to prevent fire when using high pressure reactor?1) The fuse used in the stainless steel reactor must comply with the allowed power consumption of the laboratory. 2) The safe energization capacity of
view more
05MarInstallation environment requirements when using high-pressure reactor1. There are generally relative requirements for the installation environment during use, such as air ventilation and lighting conditions. Therefore,
view more


