Pressure vessel classification and operating conditions

Sep 03, 2019

Leave a message

Classification of pressure vessels:

(1) According to the level of pressure bearing: low pressure container, medium pressure container, high pressure container and ultra high pressure container.

(2) According to the loading medium, it is divided into: non-flammable, non-toxic; flammable or toxic; highly toxic.

(3) According to the role of the process, it is divided into:

1Reaction vessel: A vessel used to complete the physical and chemical reactions of the medium

2 heat exchange container: a container for completing the heat exchange of the medium.

3 Separation container: a container for mass exchange of media, gas purification, solid, liquid, and gas separation.

4 Storage container: used to hold liquid or gas materials, storage medium or container for balancing the pressure.

The operating conditions of the pressure vessel are divided into the following three points:

Medium

The production process involves a wide variety of media and a variety of classification methods. Classified according to the state of matter, there are gases, liquids, liquefied gases, simple substances and mixtures; according to chemical characteristics, there are four kinds of flammable, flammable, inert and combustion-supporting; according to their degree of toxicity to humans, they can be classified into extreme hazards ( I), high hazard (II), moderate hazard (III), and mild hazard (IV).

2. Pressure

The pressure of the pressure vessel can come from two aspects. One is that the pressure is generated (increased) outside the container, and the other is that the pressure is generated (increased) in the container. The highest working pressure refers to the highest pressure that may occur at the top of the container under normal operating conditions.

3. Temperature

Metal temperature is the average temperature of the pressure member of the container along the thickness of the section. In any case, the surface temperature of the component metal must not exceed the allowable temperature of the steel.

https://www.heczb.com/

Send Inquiry