Operation of molecular distillation equipment
Apr 06, 2019
Leave a message
In the operation of the molecular distillation apparatus,the pressure difference between the boiling membrane and the condensing surface corresponds to the driving force of the steam flow direction.When applied to molecular distillation equipment,small pressures can cause the flow of steam,which facilitates the development of the distillation process.Molecular distillation equipment typically has a built-in condenser on the opposite side of the heated surface to reduce the operating pressure to 0.001 mbar.The device has a lower boiling temperature when in use.It is ideal for its thermal sensitivity and high boiling point.The basic composition of the molecular distillation apparatus includes a cylinder having a heating jacket,a rotor,and a built-in condenser; at the same time,a film scraper and a splash guard are accurately mounted on the fixed frame of the rotor,and a condenser L is built in.Located in the center of the evaporator,the rotor rotates between the cylinder and the condenser.
In the rectification process,the molecular distillation equipment is efficiently added from the top of the evaporator,and is effectively distributed continuously and uniformly on the heating surface through the liquid distributor of the rotor during operation.The film scraper then scrapes the liquid into a thin,turbulent film that pushes down in the spiral direction.The light molecules that escape from the heated surface condense into a liquid in a short path with little collision.The liquid will flow through the condenser tube and exit through the discharge tube at the bottom of the evaporator.The residual liquid is collected in a circular passage in the heating zone and then flows out through the lateral discharge pipe.

