Scraper evaporator is a very flexible new evaporator
Apr 22, 2019
Leave a message
The scraper evaporator is a very flexible new type of evaporator,such as high viscosity,heat sensitive,good crystallinity,etc.,the fouling material is working.It is mainly composed of a hot sheath and a scraper,a set of heated steam,a scraper mounted on the rotating shaft,a small gap between the scraper and the insulating sheath wall,usually 0.5 ~ 1.5 mm.After preheating,the top of the evaporator is tangentially oriented,Under the gravity and rotating razor,a downward spiral is formed on the inner wall.While evaporating continuously during the descent,the finished liquid is discharged from the bottom,and the two steams escape from the top.In some cases,the evaporator can evaporate the solution and directly obtain a solid product at the bottom.
After the blade of the squeegee evaporator evaporates,the housing is equipped with a heated steam jacket equipped with a rotating blade of a doctor blade.There are two types of scraper: fixed type and rotor type.The gap between the former and the wall shell is 0.5 ~ 1.5 mm.The latter changes with the wall and rotor of the gap.The material is tangentially from the upper half of the dredging evaporator.Participate(also added to the same axis as the razor and back panel).Due to gravity,centrifugal force and rotating scraper,the unit inside the solution wall forms a rotating membrane,and in this process evaporates and condenses,and the finished liquid is discharged at the bottom of the well.

