What are the reasons for low evaporation efficiency in wiped film evaporators and how to solve them?
Jan 06, 2026
Leave a message
Wiped film evaporators are widely recognized for their efficiency in separating and concentrating heat - sensitive, viscous, and high - boiling point materials. However, there are instances where these evaporators may experience low evaporation efficiency. As a wiped film evaporators supplier, I will delve into the reasons behind this issue and propose effective solutions.


Reasons for Low Evaporation Efficiency
1. Feed Properties
The characteristics of the feed material can significantly impact the evaporation efficiency. If the feed has a high viscosity, it can form a thick layer on the evaporation surface. This thick layer acts as a barrier, impeding the transfer of heat from the heating medium to the liquid, thus reducing the evaporation rate. For example, when dealing with polymers or heavy oils, the high - viscosity nature of these substances restricts the movement of molecules to the surface for evaporation.
Moreover, if the feed contains a large amount of solids or impurities, it can cause fouling on the evaporation surface. Fouling acts as an insulator, reducing the heat transfer coefficient and thereby decreasing the evaporation efficiency. For instance, in the evaporation of fruit juices that contain pulp or in industrial wastewater treatment where there are suspended solids, fouling can be a persistent problem.
2. Operating Conditions
- Temperature: Inadequate heating temperature is a common culprit. If the temperature of the heating medium is too low, there will not be enough energy to vaporize the volatile components in the feed. On the other hand, if the temperature is too high, it can lead to thermal degradation of the feed material, especially for heat - sensitive substances. This can cause the formation of unwanted by - products and also affect the quality of the final product.
- Pressure: The pressure in the evaporator plays a crucial role. A higher - than - optimal pressure increases the boiling point of the feed, making it more difficult for the volatile components to vaporize. In a wiped film evaporator, maintaining a proper vacuum is essential. If the vacuum system malfunctions or there are leaks in the system, the pressure inside the evaporator will rise, resulting in reduced evaporation efficiency.
- Feed Flow Rate: An improper feed flow rate can also lead to low efficiency. If the flow rate is too high, the liquid may not have enough time to spread evenly on the evaporation surface, and the residence time will be too short for effective evaporation. Conversely, if the flow rate is too low, the evaporation surface may not be fully wetted, leading to uneven heat transfer and reduced evaporation.
3. Equipment Design and Condition
- Wiping Mechanism: The wiping mechanism is responsible for spreading the feed into a thin film on the evaporation surface. If the wipers are worn out, damaged, or not properly adjusted, they will not be able to create a uniform thin film. This can result in thick patches of liquid on the surface, which reduces the surface area available for evaporation and impairs heat transfer.
- Heat Transfer Surface: Over time, the heat transfer surface can become corroded or scaled. Corrosion can damage the surface and reduce its heat - transfer ability, while scaling is a result of the deposition of salts or other solids from the feed. Both corrosion and scaling increase the thermal resistance between the heating medium and the feed, leading to a decrease in evaporation efficiency.
Solutions to Improve Evaporation Efficiency
1. Feed Pre - treatment
- Viscosity Reduction: For high - viscosity feeds, pre - treatment methods such as heating or dilution can be employed. Heating the feed reduces its viscosity, making it easier to spread into a thin film. Dilution with a suitable solvent can also lower the viscosity, but care must be taken to ensure that the solvent does not interfere with the subsequent separation or product quality.
- Solid Removal: To prevent fouling, solid particles can be removed from the feed through filtration or sedimentation processes. Filtration using appropriate filters can effectively remove large particles, while sedimentation can be used to separate heavier solids based on their density.
2. Optimization of Operating Conditions
- Temperature Control: Precise temperature control is essential. Using a reliable temperature control system, the temperature of the heating medium can be adjusted according to the properties of the feed. For heat - sensitive materials, lower temperatures can be used in combination with a lower pressure to achieve evaporation without thermal degradation.
- Pressure Regulation: Maintaining a proper vacuum is crucial. Regular inspection and maintenance of the vacuum system, including checking for leaks and ensuring the proper functioning of vacuum pumps, are necessary. If possible, a pressure control system can be installed to maintain a stable pressure inside the evaporator.
- Feed Flow Rate Adjustment: The feed flow rate should be optimized based on the design of the evaporator and the properties of the feed. This can be achieved through flow meters and control valves. By monitoring and adjusting the flow rate, an optimal residence time can be ensured for efficient evaporation.
3. Equipment Maintenance and Upgrades
- Wiping Mechanism Maintenance: Regular inspection and replacement of worn - out wipers are necessary. Proper adjustment of the wiping mechanism to ensure uniform film formation is also important. Upgrading to more advanced wiping technologies, such as self - adjusting wipers, can improve the performance of the evaporator.
- Heat Transfer Surface Cleaning: To remove corrosion and scaling, chemical cleaning or mechanical cleaning methods can be used. Chemical cleaning with appropriate cleaning agents can dissolve the deposits, while mechanical cleaning such as brushing or sandblasting can physically remove the scale. In some cases, the heat transfer surface can be coated with anti - corrosion or anti - scaling materials to prevent future problems.
Our Offerings and Advantages
As a wiped film evaporators supplier, we understand the importance of high - efficiency evaporation. We offer a range of high - quality wiped film evaporators, including Mechanical Compression Evaporator, Centrifugal Thin Film Vacuum Evaporator, and Vacuum Evaporation System.
Our evaporators are designed with advanced technologies to ensure uniform film formation, efficient heat transfer, and reliable operation. We also provide comprehensive after - sales service, including equipment installation, maintenance, and technical support. Our team of experts can assist you in optimizing the operating conditions of your evaporator and solving any problems that may arise.
If you are facing issues with low evaporation efficiency in your wiped film evaporator or are looking to purchase a new evaporator, we invite you to contact us for procurement and in - depth discussions. We are committed to providing you with the best solutions to meet your evaporation needs.
References
- Perry, R. H., & Green, D. W. (Eds.). (2008). Perry's Chemical Engineers' Handbook. McGraw - Hill.
- Walas, S. M. (1985). Chemical Process Equipment: Selection and Design. Butterworth - Heinemann.
