Sodium chloride MVR evaporator crystallizer
Sep 11, 2019
Leave a message
(1) MVR evaporator is suitable for evaporation and concentration of a variety of heat sensitive materials, continuous feeding and discharging, short heating time, the whole process does not exceed 3 minutes.
(2) Suitable for evaporation and concentration of foaming materials, because of the small temperature difference of heating, mild heat exchange and short heating time, it is suitable for the material characteristics of traditional Chinese medicine extract in process and equipment.
(3) This process is suitable for the production of large, medium and small enterprises.
(4) The vapor and condensate generated during the MVR evaporation process form a closed system, achieving zero emissions and zero pollution.
(5) Energy saving: There is no waste heat steam discharge, and the energy saving effect is very remarkable, which is equivalent to the 10 effect ~ 20 effect evaporator.
(6) Environmental protection: The equipment can be used without steam, no boiler, no need to burn oil (coal), no need to cool water, as long as there is electricity, you can use the company's patented equipment steam recovery system. Thereby reducing the emission of carbon dioxide dioxide, reducing the emissions of dust and solid waste, reducing pollution and improving the environment.
(7) High degree of automation: The mvr evaporator is equipped with an automatic control system designed by our company with advanced technology and reliable quality. The entire evaporator is automatically controlled in steps from pre-heating, evaporation, and maintenance. Avoid human error, reduce labor costs, and improve product quality.
(8) Small footprint: MVR evaporation and concentration equipment uses a steam recovery system to recycle secondary steam, which improves energy efficiency and is therefore more compact than conventional evaporators. If the boiler, pipe network and cold water tower are not required, the civil construction cost will be greatly saved.
(9) The heating temperature difference is small: it can be evaporated at any temperature of 60-100 °C. For the material that is easy to scale and crystallize, the probability of equipment fouling is reduced, and the damage degree of the heat sensitive material is reduced to the minimum, and the bump phenomenon is not easy to occur.
(10) Simple and convenient maintenance, long continuous operation cycle of the equipment: Because the transmission parts are few, the main equipment is simple, and the loss of goods is small, which brings convenience for future maintenance and saves financial and material resources.
(11) High-efficiency evaporator In addition to multi-effect evaporator, MVR evaporator is simple to operate: simple operation, there can be industrial computer, PLC, single-chip computer, various control systems for users to choose, saving manpower, in principle, no personnel need to manage, The huge loss caused to the user due to human error is completely avoided.
(12) High thermal efficiency: Because there is less equipment required, the insulation is increased or decreased, thus reducing the temperature difference with the ambient temperature, minimizing the environmental heat loss, and increasing the waste heat recovery system, and the sensible heat utilization rate of the condensed water is high.
(13) Low production cost: the material of the main equipment, the pipe fittings and valves of the pipe network are greatly reduced, the labor cost reduction, the equipment manufacturing cycle, and the cycle of installation and debugging are greatly shortened.
(14) Suitable for the use of new factories: In the case of new development zones or various resource shortages, it can be used without any delay.
(15) It is not a pressure vessel: especially for chemical plants, the requirements for evaporators are strict. The first requirement for traditional multi-effect evaporators is that they must be pressure vessels.
(16) Less utility: no steam system or cooling water system is required.https://www.heczb.com/

