MVR evaporator blockage solution

Apr 10, 2020

Leave a message

1. Mechanical brush tube method. The MVR evaporator needs to be shut down and disassembled, and the machine with a cleaning brush head is used to clean the dirt on the inner wall of the heat exchange tube.

2, water gun method. The high-pressure pump generates a pressure of up to 20 ~ 30Mpa, so that the scaling can be removed under the high-pressure impact of the water gun.

3. Acid shampoo. The pickling method is to remove the blockage in the tube by cleaning with an acid solution, because the substances that cause the blockage of the evaporator are mostly calcium magnesium carbonates produced by calcium magnesium ions, which can react with strong acids to form water-soluble substances. Add the cleaning agent to the cleaning tank, and periodically sample the concentration during the cleaning to ensure that the concentration of the cleaning agent is 3-10%. When the concentration of the cleaning agent is stable within 2 hours and the equipment emits gas, check whether the cleaning is clean and then clean carry out.

In fact, in the industry, the evaporator must be cleaned regularly to avoid clogging, and the evaporator must be cleaned regularly to run smoothly.

https://www.heczb.com

Send Inquiry