Evaporator selection considerations
Aug 28, 2019
Leave a message
1. Select the type of evaporator according to the nature of the material. For example, a membrane evaporator or a forced circulation evaporator is selected depending on whether the material is easily fouled or not.
2. Select the type of evaporator based on the initial concentration and throughput of the material. If the initial concentration is low and the throughput is large, a multi-effect evaporator or an mvr evaporator can be selected.
3. Select the type of evaporator based on the sensitivity of the material to temperature. For heat sensitive materials, a membrane evaporator or a scraper film evaporator can be used depending on the specific conditions, or the flow direction of steam and materials can be adjusted.
4. Select according to the boiling point of the material. The increase in boiling point is a key parameter in the evaporation operation, which affects the choice of the evaporator. If the boiling point of the material is too high, high vacuum operation must be used.
5. Choose according to the customer's investment situation and factory conditions. Under the conditions that customers are not sensitive to investment, try to use energy-efficient and efficient evaporation devices, such as multi-effect or mvr evaporation devices.

