Difference between mvr evaporator and other evaporators

1, the technology is different, the traditional evaporator may not be as advanced as the mvr evaporator. According to the principle of the evaporator, we can know that the steam from the boiling chamber is pressurized to a large pressure, then the steam can continue again. The technology used may be more advanced. The energy saved by using an mvr evaporator is similar to the energy used to add an evaporator. Therefore, the mvr evaporator is used in many places, and the energy saving effect is quite good. .

2, the multi-effect evaporation technology, which uses the steam generated by the front evaporator as the latter heating steam, so that repeated use of the cycle can reduce the consumption of steam, and the effect of using it will be better, according to the relevant calculations, found The mvr evaporator can save about half the cost.

3. When the mechanical steam is recompressed, the secondary steam is reused, and the mvr evaporator reuses the secondary steam, and the effect is also better. This can protect the environment and the resources can be fully utilized. A lot of cost savings, mvr evaporation technology is a new generation of energy-saving technology, energy-saving effect is better, can save most of the energy.https://www.heczb.com/