A thin film evaporator and Safety Precautions

1 ) It is strictly forbidden to start the motor stirring when there is no liquid / full liquid.

2 ) Reverse operation is strictly prohibited.

3 ) Never touch rotating parts during operation.

4 ) Pay attention to the safety of electricity, do not press the button with wet hands .

5 ) When the temperature in the equipment exceeds 150 degrees, please give special instructions when ordering.

1. The product has been tested as a whole before leaving the factory, and the user can hoist the entire equipment onto the equipment foundation.

2. The equipment should be leveled as a whole, and the leveling position can refer to the plane of the reducer frame. And fix the equipment on the floor or steel frame.

3. For equipment with larger specifications, in order to increase the stability of the equipment, a horizontal auxiliary support can be added to the appropriate part of the upper flange of the bottom flange. The auxiliary fulcrum only limits the radial displacement of the equipment, not the axial displacement.

4. Prepare the pipeline according to the process requirements, remove foreign objects, clean the replacement equipment, and switch on the power supply.

https://www.heczb.com